Schellinger A02-G8-1P-C63 6kA 1 polių C charakteristikos 63A miniatiūrinis automatinis jungiklis

When a 63 A circuit must handle moderate inrush currents without nuisance trips, the Schellinger A02-G8-1P-C63 delivers predictable protection. This single-pole MCB with C-curve tripping is engineered for distribution boards in commercial and residential settings, ensuring that overloads and short circuits are cleared before they escalate into costly downtime.

Advantages

The 6 kA breaking capacity safely interrupts fault currents, while the compact DIN-rail footprint saves valuable enclosure space. A clear status indicator simplifies maintenance, and screw terminals accepting up to 25 mm² conductors ensure robust, low-resistance connections. With VDE and CE certification, this breaker meets the compliance requirements of professional installations.

Suitable for

• Distribution boards in offices, retail spaces, and residential complexes
• Circuits feeding motor loads, lighting banks, or appliances with starting currents
• Projects requiring IEC/EN 60898-1 compliance and energy limiting class 3

Key specifications

• Rated current: 63 A
• Tripping curve: C
• Breaking capacity: 6 kA
• Rated voltage: 230 V AC
• Number of poles: 1
• Frequency: 50/60 Hz
• Standards: IEC/EN 60898-1
• Protection degree: IP20 (terminals)
• Operating temperature: -25°C to +55°C
• Terminal capacity: 1-25 mm²
• Electrical endurance: 10,000 cycles
• Mechanical endurance: 20,000 cycles
• Energy limiting class: 3
• Rated impulse withstand voltage: 4 kV

How to use

Mount the breaker onto a standard 35 mm DIN rail in the distribution board. Connect the phase conductor to the upper terminal and the protected circuit to the lower terminal, ensuring torque settings per the manufacturer's instructions. Verify that the total connected load does not exceed 63 A under normal operation.

For comprehensive protection, pair this MCB with a residual current device (RCD) and surge protection at the board level. Always have installation and maintenance performed by a qualified electrician to ensure safety and code compliance.